1z1-902 無料問題集「Oracle Exadata Database Machine X8M Implementation Essentials」

（A）Identify the griddisks located on the failed physical disk and drop them from the associated ASM diskgroups.

（B）Rebalance the data on the effected griddisks before performing a manual drop command.

（C）Replace the failed physical disk.

（D）Create a new celldisk and new griddisks on the replaced physical disk.

（E）Add the griddisks back into the ASM diskgroup they used to be a member of.

（F）Verify that the griddisks located on the physical disk have been successfully dropped from the associated ASM diskgroups.

（A）Verifies that the ILOM management network is working after OEDA configuration has completed for all storage and database servers in a full rack Exadata X9M-2, run from the first database server.

（B）Sets the address for each storage and database server's /SP during installation to enable ping testing from the management network, run from the first database server.

（C）Verifies that the ILOM management network is working before installation of all storage and database servers in a full rack Exadata X9M-2, run from the first database server.

（D）Sets the test address for the RoCE network for all storage and database servers in a full rack Exadata X9M-2, run from the first database server.

（A）dbmcli -e "alert metriccurrent ds_temp where metricValue > 30" on each database server

（B）dbmcli -e "create threshold ds_temp comparison='>', critical=30" on each database server

（C）dbmcli -e "set threshold ds_temp comparison=' >', critical=30" on each database server

（D）dbmcli -e "set alert ds_temp> 30" on each database server

（A）The installation can go ahead, no change is required.

（B）A splitter cable can be used to provide power to all PDU cables.

（C）The power cables from the servers to the PDUs can be rearranged inside the rack following OECA guidance to utilize a single PDU power cable.

（D）The installation cannot proceed until two power feeds are available per PDU.

（A）the number of Smart Scans performed for the table on all the storage servers, as shown when performing a list activerequest command using CELLCLI on all the cells

（B）the number of Smart Scans performed for the table on all the storage servers, as shown when performing a list ACTIVEREQUEST command using EXACLI on all the cells

（C）the number of parallel queries that accessed the table

（D）the number of serial queries that accessed the table

（E）the number of full table scans that accessed the table

（A）patchmgr will apply patches in component groups consisting of 1 database server and 2 storage servers to minimize disruption.

（B）patchmgr must be invoked with the -rolling argument with all database and storage servers listed in a single input file.

（C）patchmgr cannot apply updates in a rolling manner, you must manually apply patches with the dbnodeudpate and cellupdate tools if high availability is required.

（D）patchmgr must be invoked with the -rolling argument. Each component type must be upgraded independently of the other.

（A）4 x 6.4 TB NVMe flash cards on the database server

（B）4 x 6.4 TB NVMe flash cards on the High Capacity (HC) storage server

（C）8 x 6.4 TB NVMe flash cards on the Extreme Flash (EF) storage server

（D）No flash storage on the database server

（E）8x 6.4 TB NVMe flash cards on the Extended (XT) storage server

（A）It is required to install OEDA on the first new database server.

（B）Executing /opt/oracle.supportTools/reclaimdisks.sh -free -reclaim on each Exadata X9M Database server is required to reclaim disk space and perform partition reconfiguration.

（C）In order to configure the servers with Oracle Exadata Deployment Assistant (OEDA), the new server information must be entered in OEDA, and the configuration file must contain existing nodes.

（D）Do not proceed if the OEDA Validate Configuration File step displays an error message about missing files p6880880.zip.

（E）The applyElasticConfig.sh script performs network configuration for the new servers. The new servers are restarted at the end of the process.

（A）2, 8, 7, 3, and 6

（B）2, 7, 8, and 6

（C）5, 8, 7, and 6

（D）4, 7, 8, 3, and 6

（E）1, 8, 7, 3 and 6