300-810 無料問題集「Cisco Implementing Cisco Collaboration Applications」

（A）When a high availability event takes place, the end user sessions are moved from the failed server to the backup.

（B）When the server has been restored, the server automatically fails back.

（C）When an event takes place, the end user sessions are not moved from the failed server to the backup.

（D）When the server has been restored to a normal state, user sessions remain on the backup server.

（A）User Report

（B）IM & Presence Database Status

（C）Presence Usage

（D）IM & Presence Table Count Summary

（A）four

（B）three

（C）two

（D）one

（A）Ensure that codec G.711alaw is configured In the dial peer.

（B）Ensure that codec G.729 is configured In the dial peer.

（C）Ensure that codec G.711ulaw is configured in the dial peer.

（D）Ensure that codec G.722 Is configured In the dial peer.

（A）calling search spaces

（B）restriction tables

（C）partitions

（D）inbox profiles

（A）Go to "Presence User Assignment" on the Cisco UCM Administration page and select "rebalance users" for all users.

（B）Start all critical services on both nodes and select "rebalance users" in the "Presence User Assignment".

（C）Start all critical services on the second node, and select the Fallback button in the "Presence Redundancy Group Configuration".

（D）Go to "Presence Redundancy Group Configuration" on the Cisco UCM Administration page and select the Fallback button.

（A）service provider

（B）identity provider

（C）LDAP

（D）Cisco UCM

（A）Configure CUP administrator

（B）Enable the Failover Check box

（C）Select the enable high availability checkbox and save the configuration change

（D）Assign the subscriber to the redundancy group

（E）Configure the CUP AXL user.

（A）Assign the duplicate user to the secondary Cisco IM and Presence node.

（B）Rename the directory URI value for one of the users to ensure that there is no duplication.

（C）Rename the User ID value for one user if different users on different clusters have the same User ID assigned.

（D）Unassign a user from one of the clusters when the same user is assigned to two different clusters.

（E）Delete the user ID for the duplicate user ID.

（A）broadcast

（B）admin

（C）root

（D）superuser

（E）guest

（A）Cisco TMS and Cisco Expressway do not have synchronized time settings.

（B）SNMP is not enabled on Cisco Expressway.

（C）Cisco TMS was not upgraded before adding Cisco Expressway.

（D）Cisco TMS is running a version earlier than 12.5.

（E）The management address on Cisco VCS does not match the Cisco TMS IP address.

（F）UDP port 161 is blocked on the network.

（A）Add the "Allow control of the device from the CTI" option under the client services profile configuration page

（B）Associate the User with the desk phone under the user configuration page on Cisco UCM

（C）Select "Primary Line" under the user configuration page on Cisco UCM

（D）Add the "Allow control of the device from the CTI" option under the desk phone configuration page

（A）Change the language setting on the prompt.

（B）Rerecord AAWelcome.wav.

（C）Increase the number of sessions on the aa2 application.

（D）Change the welcome prompt setting.

（E）Change the trigger number.

（A）IP address/FODN of the Cisco Unity Connection servers

（B）IP address/FQDN of Cisco UCM servers

（C）IP address/FODN of LDAP server

（D）system administrator credentials

（A）when recording a message as an alternate greeting

（B）during recording and playback by phone from Cisco Unity Connection

（C）during outbound transfers to the PSTN

（D）during incoming calls to the operator or specific subscribers

（A）It is used on an inbound SIP trunk from Cisco Unified Communications Manager IM & Presence to route presence requests that come from the end user.

（B）It is used within the Cisco Unified Communications Manager IM & Presence server to track status information of Cisco Jabber clients.

（C）It is used when adding a subscriber to Cisco Unity Connection.

（D）It allows MWIs to be triggered when a message is received in Cisco Unity Connection.

（A）Sign the Cisco UCM tomcat certificate with a trusted certificate authority.

（B）Sign the Cisco Untried IM and Presence server certificate with trusted a trusted

（C）Import the certificate of cucm.ex.com into the Trusted Certificate Authorities on the PC running Jabber.

（D）Import the Cisco UCM CallManager certificate into the Trusted Certificate Authorities on the PC running Jabber

（E）Sign the Cisco UCM CallManager certificate with a trusted certificate authority.

（A）Conference Control Center

（B）Cisco TMS Provisioning Extension

（C）Reporting and Analytics

（D）Infrastructure Management

（A）Click the Fallback button in the Server Action pane.

（B）Set the Automatic Failover parameter in the Server Recovery Manager Service Parameters to the value True.

（C）Perform a restart of the IM&P primary server to force fallback.

（D）Advise all users to re-login to their Jabber clients.

（E）Confirm that both IM&P servers are configured in the Presence Redundancy Group configuration pane.

（A）Open UDP port 5062 outbound on the firewall.

（B）Open TCP port 5062 outbound on the firewall.

（C）Open TCP port 8934 outbound on the firewall.

（D）Open UDP port 8934 outbound on the firewall.