350-801 無料問題集「Cisco Implementing and Operating Cisco Collaboration Core Technologies」

（A）H.323 endpoint registration

（B）SIP gateway for PSTN providers

（C）VTC bridge

（D）MRA

（A）Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher.

（B）Check for duplex/speed mismatches between the network port settings of the system and network switch.

（C）Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false".

（D）Use direct IP address calls between two endpoints to troubleshoot call quality issues.

（A）On the inbound SIP trunk, change Significant Digits to 10.

（B）Change the service parameter Apply Transformations On Remote Number to True.

（C）Configure a calling party transformation pattern that keeps only last 10 digits.

（D）Configure a translation pattern that has a calling Party Transform Mask of XXXXXXXXXX.

（A）They define the geographic regions to which resources are assigned.

（B）They define the maximum bandwidth of the codec that is used for a call.

（C）They define the amount of available bandwidth for the link.

（D）They define the minimum bandwidth of the codec that is used for a call.

（A）Verify that the RJ-11 cable is plugged into the PC port.

（B）Check the RJ-65 cable.

（C）Verify that the switch port of the phone is enabled

（D）Disable HSRP on lhe access layer switch.

（E）Verify that the phone's network can access the option 150 server.

（A）utilization and adoption metrics of all remotely connected devices

（B）additional visibility of the edge traffic in an organization

（C）highly secure firewall-traversal technology to extend organizational reach

（D）complete endpoint registration and monitoring capabilities for devices that are local and remote

（E）session-based access to comprehensive collaboration for remote workers, without the need for a separate VPN client

（A）Payload type 110 was negotiated rather than type 101.

（B）G.729 rather than G.711ulaw was negotiated.

（C）DTMF was negotiated properly in these messages.

（D）DTMF was not negotiated on the call.

（A）Enable application level authorization.

（B）Accept unsolicited notification

（C）Accept presence subscription

（D）Accept replaces header

（E）Allow charging header

（A）1

（B）16

（C）4

（D）8

（A）ICMP

（B）DNS

（C）SNMP

（D）SMTP

（A）add voice-class codec 20

（B）add session codec 20

（C）add codec preference 20

（D）add voice-codecs 20

（A）Disable Auto-Registration.

（B）Associate the end user to a SIP Profile.

（C）Enable Auto-Registration.

（D）Associate the end user to the Standard CCM Super Users group.

（A）SIP trunk

（B）application server name

（C）Cisco UCM Name

（D）primary TFTP server for option 150

（A）Add an additional NTP server on the Cisco UCM subscriber node.

（B）Ensure that the Cisco UCM subscriber node is running.

（C）Add an additional NTP server to the Cisco UCM publisher node.

（D）Ensure that the Cisco UCM publisher node is up and running.

（A）510 ms round trip

（B）80 ms round trip

（C）40 ms round trip

（D）150 ms round trip

（A）The end user could incorrectly tag their traffic to bypass firewalls.

（B）The end user may incorrectly tag their traffic to be prioritized over other network traffic

（C）The end user could incorrectly tag their traffic to advertise their PC as a default gateway.

（D）There is no reason not to include an end user's PC device m a QoS trust boundary

（A）ADD a media termination point that supports G.711ulaw and G.729.

（B）Add a transcoder that supports G.711ualw and G.729.

（C）Noting: both sides support G.729.

（D）Nothing: both sides support payload type 101.