CWDP-303無料問題集「CWNP Certified Wireless Design Professional」

質問 1

What advantage provided by 802.11n and 802.11ac is not usable in 1X1:1 low-end client devices?

（A）MCS data rates

（B）Channel bonding

（C）Maximal Ratio Combining

（D）Mandatory data rates

正解：D 解答を投票する

質問 2

Which document provided to your customer should include all devices and parts that are going to be used during the deployment of their WLAN infrastructure?

（A）Design report

（B）Project plan

（C）BoM

（D）SoW

正解：C 解答を投票する

質問 3

You have performed a validation site survey after deploying a WLAN infrastructure that is an All-Wireless-Office. One specific application of your customer is experiencing delay when using the application after moving from wired connectivity. After your validation, you realized that all APs are using 80 MHz channel-widths instead of 20 MHz on the 5 GHz band, as it was designed. What can be done to resolve the delay on this application?

（A）Add more APs using 80 MHz channel-widths

（B）APs should be using 160 MHz channel-widths to get more throughput

（C）Reconfigure to use 20 MHz channel-widths, so reuse of the frequency is more effective

（D）Power-off half of the APs to reduce CCI and keep 80 MHz channel-widths

正解：C 解答を投票する

質問 4

What service must be implemented on your customers' network to authenticate users against an LDAP database prior to access to the WLAN infrastructure being granted?

（A）SFTP

（B）TLS

（C）RADIUS

（D）NTP

正解：C 解答を投票する

質問 5

You performed a site survey with two USB Wi-Fi adapters using a special driver written for the site survey software. After deployment, you realized that the client devices used by your customer are getting lower RSSI values than that shown during your site survey. What is the most likely reason for this result?

（A）USB Wi-Fi adapters have a greater sensitivity than internal Wi-Fi adapters.

（B）USB Wi-Fi adapters designed for site surveys may have better sensitivity than regular Wi-Fi cards installed in client devices.

（C）Regular Wi-Fi cards installed in client devices do not support the same protocols as survey adapters.

（D）The transmit power on the APs is higher than needed.

正解：B 解答を投票する

質問 6

During your first pre-deployment meeting with the deployment team, you hand out the full design documentation to all of them. What's your primary goal during this meeting?

（A）To explain how Wi-Fi works.

（B）To justify the budget.

（C）To discuss AP functionality.

（D）To explain design decisions and ensure understanding of design documents.

正解：D 解答を投票する

CWDP-303 無料問題集「CWNP Certified Wireless Design Professional」

弊社を連絡する

関連リンク

トップ試験