H13-629_V2.0 無料問題集「Huawei HCIE-Storage (Written) V2.0」

（A）Simultaneous replication

（B）support multiple file system consistency replication

（C）Asynchronous replication

（D）Synchronous and asynchronous replication

（A）False

（B）True

（A）Increase the number of LUNs and limit the number of hosts accessing the same LUN.

（B）Reduce the number of virtual machines per LUN.

（C）Change the type of virtual disk created.

（D）Reduce the number of snapshots.

（A）Fencing LUN should be placed in the same RAID group.

（B）If the RAID group is configured as RAID 6, the number of member disks isrecommended to be 9 disks, and it is not recommended to configure the RAID group.

（C）When creating a LUN, write business for a long time, the stripe depth recommended 512KB.

（D）When the access to the N8500 is all on the intranet, and the client traffic is not equal,it is recommended to configure the "balance-alb" mode (that is, bond 6 mode).

（A）Confirm Cache dirty data has been saved

（B）Before switching services to the peer controller, check that the multipathing software in the system is installed and effective on the host.

（C）Before plugging and unplugging the controller, make sure that the service is stopped or has switched to the peer controller

（D）Master-slave controller must be switched to be replaced controller for backup

（A）Client corresponding partition insufficient space

（B）Client One or more simpana services are not started

（C）The storage policy checked enable managed disk space for disk library option, leading to the disk'sthresholds from the effectively managed disk space.

（D）The client is abnormal with cs or MA communication.

（A）use rmmod + driver name, remove directly

（B）kill directly kill the drive process

（C）Directly uninstall the driver rpm package

（D）use modeprobe-r + driver name, remove directly

（A）CIFS does not allow multiple clients to access

（B）The CIFS client writes the shared file and does not write to the storage system immediately. Instead, the file is saved in the local cache and can be read againImprove read rate, improve performance

（C）CIFS supports a variety of character sets to ensure CIFS can be used in all language systems

（D）CIFS does not support anonymous transmission and shared authentication access

（A）It allows asynchronous writes to the file system and writes to the disk of the file system when the operation request is not responding

（B）NFS shares created can be accessed by all clients

（C）The client can modify the file system when it accesses it

（D）It sets the client's root user does not have root privileges to access the NFS shared file system

（A）Use3-tier Tier, 1TB high performance layer, 4TB performance layer, 10TB capacity layer, and configure LUN1 to allocate high-performance layer capacity first, LUN2 preferentially allocates performance layer capacity and LUN3 preferentially allocates capacitylayer capacity

（B）The use of 3-tier Tier, high-performance layer 1TB, performance layer is 4TB, capacity layer is 10TB, while configuring LUN1, LUN2, LUN automatic relocation. The LUN3 is migrated preferentially to the low-performance layer

（C）Use 3-tier Tier, 1TB high-performance layer, 4TB performance layer, 10TB capacity layer, configure LUN1 and LUN2 to migrate automatically, and LUN3 priority allocation of low-performance layer capacity

（D）Set the monitoring period of the Smart tier to 8:00 to 18:00 every day from Monday to Friday. The migration period is not overlapped with the monitoring period

（A）False

（B）True

（A）In the absence of a third-party arbitration site, the quorum disk selects 3 LUNs of the same RAID group in the same array with a size of 1GB

（B）Storage arrays include Huawei and IBM arrays. The arbitration disks are preferably configured on Huawei arrays

（C）inspection found that there is a fault condition disk in the arbitration disk, you need to promptly repair or replace the fault arbitration disk

（D）In the dual live scenario, when there is a third-party site arbitration array, the arbitration disks are placed on the third-party site arbitration array and an independent UPS power supply is deployed

（A）One or more backup pieces form a backupset

（B）The backup piece is a binary file used to store the backup set information

（C）Backup slice size is unlimited, but its size can be set by maxpiecesize

（D）A backup piece corresponds to a separate input output file