HPE0-J68無料問題集「HPE Storage Solutions」

質問 1

A customer is planning to connect a new HPE 3PAR StoreServ system to its existing Synergy based composable infrastructure via direct-attach.
Which tool would be used to manage the storage?

（A）HPE Synergy Image Streamer

（B）HPE SAN Network Advisor

（C）HPE Synergy Composer

（D）HPE InfoSight for 3PAR

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 2

A customer has a VMware environment running vSphere 6.5. They are running DL380 Gen10 servers with HPE 82Q adapters connected through a HPE SN3000B switch to a Nimble HF40. They plan to upgrade the hypervisor.
What should they use to identify the latest firmware and compatibility information?

（A）SPOCK

（B）SAN Health Diagnostics

（C）OneView

（D）SAN Design Reference Guide

正解：A 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 3

What HPE Alletra 9000 CLI command allows you to display teal-time statistics on exported volumes including roundtrip time of an 10 as seen by the system?

（A）srstatvlun

（B）statvlun

（C）srstatvv

（D）statvv

正解：B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 4

You are required to create a sizing based on an existing Vmware legacy configuration for a customer solution for a new HPE SimpliVity setup. Which HPE tool can you utilize to create the required output?

（A）CloudPhysics

（B）Ninja Stars

（C）0CA

（D）Ninja Online

正解：A 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 5

Which functionality available in an HPE 3 Par StoreServ 8400 system that is not available in an HPE 3par Storesrve 7200

（A）Data at Rest Encryption

（B）Persistent Checksum end-to-end data integrity (correct)

（C）Adaptive optimization and dynamic Optimization

（D）Online import license

正解：B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 6

You are proposing a new Nimble solution to a customer that recently experienced data loss in their existing storage array.
Which features of the Nimble array should you emphasize to your customer to address their concerns? (Choose two.)

（A）compression

（B）encryption

（C）triple party

（D）quick RAID rebuild

（E）deduplication

正解：C、D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 7

A solution architect is explaining RBAC concepts behind the HPE GreenLake Platform. How can the customer manage users in HPE GreenLake Platform after creating new company account?

（A）HPE Support must be used to create an administrator account for the organization.

（B）Single company can only have one account.

（C）The creator of the company account must create another account with Account Administrator role.

（D）The creator of the company account is automatically assigned to the Account Administrator role for the organization.

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 8

You are advising a customer on a new backup strategy to deploy HPE StoreOnce.
What should you recommend to ensure the best storage utilization and performance?

（A）use separate backup targets for different data types

（B）consolidate activity windows for housekeeping tasks

（C）size solution for a single backup device

（D）combine management and backup Ethernet traffic

正解：A 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 9

Which StoreOnce Gen4 features are included with the system software without additional licenses? (Choose two.)

（A）VTL/NAS replication

（B）Flexible I/O HBAs

（C）Cloud Bank

（D）Catalyst

（E）Encryption

正解：A、D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 10

While demonstrating an HPE 3PAR StoreServ 9450 array, the customer asks you to demonstrate the File Persona features.
Which objects do you need to create to demonstrate these features? (Choose two.)

（A）Remote copy group

（B）Host

（C）Storage container

（D）File share

（E）Virtual file server

正解：D、E 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 11

An HPE 3PAR StoreServ customer with FC, SSD and NL, drives is facing extreme latency during peak business hours with an OLTP application. They have enabled tiering using all drive types.
What could be used to resolve the issue?

（A）Adaptive Optimization using tier 1

（B）Dynamic Optimization between tier 0 and tier 1

（C）Dynamic Optimization using tier 1

（D）Dynamic Optimization using tier 2

正解：B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 12

Which 5SD controller component is responsible for wear leveling?

（A）DRAM

（B）Processor

（C）NAND memory controller

（D）SATA interface chip

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 13

You have configured a performance alert with the following command: "createsralertcrit port writlops> TO00O.sumwrite_iops>5OOOO alert" Which of the following options will trigger the alert?

（A）If an array port has received more than 10 000 write IOPS and if the sum of all write I0PS for all ports exceeds 50 000

（B）If a host port has transfered more than 10 000 write IOPS or if the sum of all host write IOPS for all ports of that host exceed 50 000

（C）If an array port has received more than 10 000 write IOPS or if the sum of all write IOPS for all ports exceeds 50 000

（D）If a host port has transfered more than 10 000 write I0P5 and if the sum of all host write IOPS for all ports of that host exceed 50 000

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 14

You are presenting a Nimble solution based on CS3000 hardware to a customer. Which support advantage will be provided with this solution(select two)

（A）Infosight handles the work of 1st and 2nd level support specialist Infosight offers predictive analytics and integration into HPE support center using insight Online.

（B）Infosight performs firmware and software updates without additional administrative support.

（C）Customers only have to deploy a service processor for automating support tasks.

（D）Customers always interact with a 3rd level support engineer ,when needed

正解：A、D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 15

Which software feature should an HPE 3PAR Storeserv 8000 customer use to optimize data protection and recovery, Including rapid online recovery for his VMware environment?(select two)

（A）HPE 3PAR Security software suite

（B）HPE 3PAR Virtual Copy software

（C）HPE 3PAR Remote copy software

（D）HPE 3PAR File persona Software suite

（E）HPE StoreOnce recovery manager central for VMware

正解：B、E 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 16

You are designing a new HPE 3PAR StoreServ solution.
Which HPE tool allows editing the Customer Intent Document and adding specific instructions for packing?

（A）Storage Sizing Tool

（B）SAF Collect

（C）One Config Advanced

（D）NinjaSTARS

正解：C 解答を投票する

質問 17

A second group of 11 same-capacity disks has been added to your customer's HPE Alletra 6000 head shelf. After 1 hour it seems the new drives have not merged with the existing driveset. Which action should you perform to fix the problem?

（A）If you add a second driveset, it will always be configured as a separate RAID set.

（B）Log in to the Alletra 6000 CLI via SSH, then run the "tunesys" command to trigger the RAID rebalancing process.

（C）Log in to the Alletra 6000 local UI, then from the Hardware section of the UI next to the head shelf icon click "Admit."

（D）The merging process may take up to 24h, wait and then verify the next day.

正解：B 解答を投票する

質問 18

A customer is evaluating an HPE 3PAR StoreServ system in a proof-of-concept project. The customer wants to receive emails about important storage system events and alerts.
What feature do you need to configure?

（A）Secure Service Agent

（B）HPE OneView integration

（C）Local Notification Service

（D）Real-time Alert Processing

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

HPE0-J68 無料問題集「HPE Storage Solutions」

弊社を連絡する

関連リンク

トップ試験