HPE0-S59無料問題集「HPE Compute Solutions」

質問 1

You configured a virtual machine cluster using the HPE Storage Integration Pack for VMware vCenter.
Click the option in the SSMC main menu that you can use to verify whether a virtual storage operation is properly created on HPE Primera or 3PAR.

正解：

Explanation:
To verify whether a virtual storage operation is properly created on HPE Primera or 3PAR using the HPE Storage Integration Pack for VMware vCenter, you would click on the "Virtualization" option in the SSMC (StoreServ Management Console) main menu. This option allows you to manage and monitor storage operations related to virtual environments, including VMware integration.

質問 2

Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

（A）vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN

（B）20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

（C）vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses

（D）One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 3

After deploying an HPE Superdome Flex 280, you need to check the network protocol status and SSL certificate.
Click the appropriate section In the HPE Superdome Flex 280 management interface that will allow you to complete this task.

正解：

Explanation:
To check the network protocol status and SSL certificate in the HPE Superdome Flex 280 management interface, you should click on the "Security" section on the left-hand menu. This section typically provides access to details about protocols like HTTPS, SSL certificates, and port configurations.

質問 4

In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

（A）Pause flood protection

（B）sFlow

（C）Storm control

（D）Port flap protection

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 5

Your customer uses HPE OneView to manage their HPE Synergy environment. They plan to use it to manage a new set equipment that includes.
- 20 HPE ProLiant DL365 Gen10 Plus servers
- 20 HPE ProLiant DL380 Gen10 Plus servers
- 5 HPE Primera 650
- 5 HPE MSA 2062 Storage Array
Which statements about now OneView will work with this new equipment are true? (Select two)

（A）HPE OneView replaces array management tools for both types of array

（B）HPE Primera 650 can be managed using HPE OneView.

（C）HPE MSA 2062 Storage Array is not supported in HPE OneView

（D）HPE ProLiant DL365 Gen10 Plus servers are not supported in HPE OneView

（E）HPE ProLiant DL380 Gen10 Plus servers have an HPE OneView license included

正解：B、C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 6

Your customer plans to deploy VMware ESXi 7.0 U2, and they are looking for a hardware platform that will allow them to use up to 24 TB of physical memory.
Which HPE compute system meets the customer's requirements?

（A）HPE ProLiant DL380 Gen 10 Plus

（B）HPE Synergy 480 Gen10 Plus

（C）HPE Superdome Flex

（D）HPE ProLiant DL580 Gen 10

正解：C 解答を投票する

質問 7

Your customer plans to setup an HPE Synergy solution based on SY480 Gen10 compute nodes with the following connectivity options - SAS connectivity installed in the first fabric - FC connectivity Installed In the second fabric - Ethernet connectivity installed in the third fabric.
Which statement regarding this setup is true?

（A）Compute nodes must have a second CPU installed to access the second fabric.

（B）Interconnect modules that provide SAS connectivity should be moved to the third fabric

（C）Each interconnect module in each fabric must be properly licensed in HPE OneView

（D）Each compute node must have at least 768GB of memory installed

正解：A 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 8

Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module. What should you verify first when troubleshooting this problem?

（A）If the D3940 module is imported in managed state that allows volume provisioning.

（B）If the D3940 storage module is property licensed through HPE OneView interface.

（C）If there is at least one ISCSI network configured that will provide access to the module.

（D）If there Is a logical interconnect created based on the 12Gb SAS switches.

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 9

Your customer plans to add four HPE Synergy frames to an existing management ring Ail installed frames are equipped with two 2-port FLM modules, while new frames will be equipped with 4-port FLM modules.
Which statement about mixing different FLM modules is true?

（A）Existing 2-port FLM modules must be replaced with 4-port FLM modules

（B）Mixing different FLM modules is allowed if all of them have the same firmware version

（C）A management ring can contain mixed frame link module configurations

（D）A management ring with mixed FLM modules cannot have more than 12 frames

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 10

Your customer has an HPE Synergy platform deployed and managed using HPE OneView. The customer also has HPE Superdome Flex with RMC deployed They plan to deploy a second nPar and HPE Superdome Flex
280 They plan to manage new components using HPE OneView
What must be done to achieve this goal?

（A）The customer should deploy an HPE OneView appliance for HPE Superdome Flex management

（B）The customer has to add HPE Superdome Flex to the HPE OneView used to manage HPE Synergy

（C）The customer must add a second Rack Management Controller for HPE Superdome Flex 280

（D）The customer must use IL05 to add HPE Superdome Flex systems to HPE OneView

正解：B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

HPE0-S59 無料問題集「HPE Compute Solutions」

弊社を連絡する

関連リンク

トップ試験