HPE6-A73無料問題集「HP Aruba Certified Switching Professional」

質問 1

When cutting and pasting configurations into NetEdit, which character is used to enter commands within the context of the previous command?

（A）<ESC>

（B）Space

（C）Tab

（D）">"

正解：C 解答を投票する

質問 2

An access layer AOS-CX has no OoS configuration on it. The switch receives an 802.1Q tagged VoIP frame on a port. The frame has an 802.1p value of 6. The IP header has a DSCP value of EF46 How will the switch forward this frame?

（A）Forwards It based on the 802.1p value in the frame

（B）Forwards it as a normal frame

（C）Forwards It based on the DSCP value in the frame

（D）Places it in the high priority queue

正解：B 解答を投票する

質問 3

An administrator is defining a VSX LAG on a pair of AOS-CX switches that are defined as primary and secondary. The VSX LAG fails to establish successfully with a remote switch; however, after verification, the remote switch is configured correctly. The administrator narrows down the problem to the configuration on the AOS-CX switches.
What would cause this problem?

（A）The VSX LAG hash does not match the remote peer

（B）LACP was enabled in active mode on the VSX LAG

（C）The VSX LAG interfaces are in layer-3 mode

（D）Local optimization was not enabled on the VSX LAG

正解：A 解答を投票する

質問 4

What is a best practice concerning voice traffic and dynamic segmentation on AOS-CX switches?

（A）Switch authentication and local forwarding of the voice traffic

（B）Switch authentication and user-based tunneling of the voice traffic

（C）Controller authentication and port-based tunneling of the voice traffic

（D）Controller authentication and user-based tunneling of the voice traffic

正解：A 解答を投票する

質問 5

What is correct regarding the operation of VSX and multicasting with PIM-SM routing configured?

（A）Each VSX peers runs PIM and builds its own group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

（B）Each VSX peers runs PIM and creates a shared group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

（C）Each VSX peers runs PIM and creates a shared group database. Both VSX peers can forward multicast streams to receivers in a VLAN, achieving load sharing

（D）Each VSX peers runs PIM and builds its own group database. One of the VSX peers is elected as the designated router (DR) to forward multicast streams to a receiver VLAN

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 6

An administrator is managing a pair of core AOS-CX switches configured for VSX. Connected to this core are pairs of aggregation layer AOS-CX switches configured for VSX. OSPF is running between the aggregation and core layers. To speed up OSPF convergence, the administrator has configured BFD between the core and aggregation switches.
What is a best practice the administrator should implement to reduce CPU processing on the switches if a BFD neighbor fails?

（A）Increase the BFD echo timers

（B）Disable ICMP redirects

（C）Implement graceful restart

（D）Increase the VSX keepalive timer

正解：B 解答を投票する

質問 7

An administrator of a large campus network needs a solution that will provide root cause analytics to quickly identify problems so that they can quickly be fixed.
Which AOS-CX switch feature should the administrator utilize to help with root cause analytics?

（A）VSX

（B）NAE

（C）NetEdit

（D）VoQ

正解：B 解答を投票する

質問 8

A network has an ABR that connects area 0 and 1. A network engineer configures a summarized route for area 0. The ABR is a designated router (DR) for the segment it uses to connect to area 1.
Which LSA type is assigned to this route when the summarized route is advertised into area 1 by the ABR?

（A）LSA4

（B）LSA2

（C）LSA3

（D）LSA1

正解：C 解答を投票する

質問 9

An administrator wants to use an existing Aruba gateway's firewall policies to filter both wireless and wired traffic. Which AOS-CX switch feature should a customer implement to ensure the gateway applies the same or similar firewall policies to users' wired and wireless traffic?

（A）GRE tunneling

（B）User-based tunneling

（C）IPSec tunneling

（D）Port-based tunneling

正解：A 解答を投票する

質問 10

A company has recently upgraded their campus switching infrastructure with AOS-CX switches. They have implemented 802.1X authentication on access ports where laptop and IOT devices typically connect. An administrator has noticed that for POE devices, the AOS-CX switch ports are delivering the maximum wattage to the port instead of what the device actually needs.
Concerned about this waste of electricity, what should the administrator implement to solve this problem?

（A）Create device profiles with the correct power definitions

（B）Implement a classifier policy with the correct power definitions

（C）Enable AAA authentication to exempt LLDP and/or CDP information

（D）Globally enable the QoS trust setting for LLDP and/or CDP

正解：A 解答を投票する

HPE6-A73 無料問題集「HP Aruba Certified Switching Professional」

弊社を連絡する

関連リンク

トップ試験