JN0-682無料問題集「Juniper Data Center, Professional (JNCIP-DC)」

質問 1

You host a multitenant data center that runs VMware. You must perform deep packet inspection on all inter-tenant traffic that is flowing between the VMs within the same hypervisor. Your solution must provide the security services without needing to leave the physical device. In this scenario, what should you do to solve this problem?

（A）Use VLANs to isolate each tenant's networks and use an SRX Series device to evaluate inter-tenant traffic.

（B）Use a vMX device to isolate each tenant's network and use firewall filters to evaluate inter-tenant traffic.

（C）Use a VLANs to isolate each tenant's network and use IP tables to evaluates inter-tenant traffic.

（D）Use separate vswitches to isolate each-tenant's network and use and use a vSRX device to evaluate inter-tenant traffic.

正解：D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 2

In the exhibit, VM1 is part of the same VXLAN segment as VM3.

Which type of message will VTEP B initially send to the RP so that VM3 can communicate with VM1?

（A）IGMP Join (*, G)

（B）IGMP Join (S,G)

（C）PIM join

（D）PIM register message

正解：D 解答を投票する

質問 3

You are asked to design a deployment plan for a large number of QFX Series switches using ZTP. The ZTP deployment plan must ensure all switches are configured with their designated configuration file.
Which DHCP option and subscription combination would be used to accomplish this task?

（A）DHCP option 43 a suboption of 00.

（B）DHCP option 66 a suboption of 01.

（C）DHCP option 43 a suboption of 01.

（D）DHCP option 66 a suboption of 00.

正解：C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 4

Which two characteristics would you consider when selecting spine devices in an IP fabric?
(Choose two.)

（A）scaling limitations

（B）data center location

（C）port density

（D）spanning tree limitations

正解：A、C 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 5

You are asked to deploy an Ethernet bridging design in a data center with the criteria shown below.
- Routing must occur on the spine devices.
- VTEPs must terminate on the leaf devices.
- Facilitate inter-VLAN communication.
- Layer 2 gateways must be present on spine and leaf devices.
Which architecture should you use in this scenario?

（A）edge-routed bridging architecture

（B）collapsed spine architecture

（C）centrally-routed bridging architecture

（D）bridge overlay architecture

正解：C 解答を投票する

質問 6

You are asked to scale the available bandwidth within your Clos data center network to support more east-west traffic. In this scenario, what are two ways to accomplish this task? (Choose two.)

（A）Add leaf devices to increase available paths and bandwidth

（B）Add spines to increase available paths and bandwidth.

（C）Use aggregated interfaces in the fabric.

（D）Interconnect all spines to increase available paths and bandwidth.

正解：A、B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 7

Which two statements are correct about VXLAN domains? (Choose two.)

（A）With Layer 2 traffic, the VLAN ID is transmitted within the packet.

（B）With Layer 3 traffic, the VLAN ID is discarded before the packet is sent.

（C）With Layer 3 traffic, the VLAN ID is transmitted within the packet.

（D）With Layer 2 traffic, the VLAN ID is discarded before the packet is sent.

正解：A、D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 8

Which two statements are correct about a spine and leaf-based IP fabric? (Choose two.)

（A）There is no need for redundancy at the server level.

（B）Traffic is diverted within the fabric when a device or link fails.

（C）Leaf switches broadcast frames to all other leaf devices.

（D）Clos networks demonstrate good scaling features.

正解：B、D 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 9

You are an architect for an enterprise organization that currently operates three data centers with plans to expand to five data centers in the next year. You already notice large amounts of BUM flooding and must control this issue before implementing the next two data centers.
Which feature would address this issue?

（A）VXLAN BUM traffic filter

（B）mesh groups

（C）type-5 routes

（D）type-6 routes

正解：B 解答を投票する

解説: (JPNTest メンバーにのみ表示されます)

質問 10

You want to monitor the value of a MIB object or variable against configured thresholds and generate a corresponding event when the value of a variable crosses a threshold.
In this scenario, which feature should you use to accomplish this task?

（A）Event Policy

（B）Event Script

（C）RMON

（D）generate-event

正解：C 解答を投票する

JN0-682 無料問題集「Juniper Data Center, Professional (JNCIP-DC)」

弊社を連絡する

関連リンク

トップ試験