LEED-AP-O-M 無料問題集「USGBC LEED AP Operations +Maintenance (LEED AP O+M)」

（A）75%

（B）85%

（C）50%

（D）90%

（A）That the meter data is remotely accessible

（B）That the meter is capable of storing data for at least 12 months

（C）That the meter(s) record data at a minimum of 15 minute intervals

（D）That the meter(s) can be manually read

（A）Meter water use for each building separately; meter outdoor water use for the associated grounds

（B）Meter water use for the entire campus (buildings and the associated grounds) using a single meter

（C）Meter water use for all buildings aggregately with a single meter; outdoor water use for the associated grounds does not need to be metered

（D）Meter water use for all buildings aggregately with a single meter; meter outdoor water use for the associated grounds

（A）The building is not eligible for this credit

（B）The tenant's purchasing is assumed to be 50% compliant toward the sustainability criteria

（C）The total purchases would be decreased by the tenant's pro rata square footage

（D）If the tenant's space is less than 10% of the total building, their total purchases can be excluded

（A）Five months

（B）Three months

（C）13 months

（D）12 months

（A）demonstrating an energy efficiency of at least 25% better than the national average for typical buildings of similar type based on energy source

（B）developing a master list of findings identifying systems or pieces of equipment including the defects or problems and proposed solutions

（C）conducting an energy audit that develops a commissioning plan for the building's major energy using system

（D）providing a program demonstrating no or low cost measures of improvement to increase energy efficiency

（A）the required 100% impervious surfaces

（B）Water Efficiency Credit, Cooling Tower; Sustainable Sites Credit, Joint Use of Facilities

（C）the required 3% vegetated site area

（D）Sustainable Sites Credit, Site Management; Water Efficiency Credit, Outdoor Water Use Reduction

（A）Establish an ENERGY STAR Portfolio Manager profile

（B）Use Labs21 Energy Benchmarking tool to calculate minimum energy performance

（C）Benchmark building site energy data of at least three similar buildings

（D）Compile meter data into daily and weekly summaries

（A）Historical energy consumption data or calibrated energy simulation

（B）Short-term system measurements using data loggers or national average source energy data

（C）Local energy supplier estimates or calibrated energy simulation

（D）Historical energy consumption data or national average source energy data

（A）Exterior

（B）Lavatory

（C）Mechanical

（D）Individual occupant